No results were found for the filter!
Whether you just want to have a spare for everything, or your replacing a damaged o-ring or two, this kit has a full rebuild for your Shocker XLS or RSX. Factory o-rings are provided in specific materials and durometers to achieve...
15.95€ *
Batteries connector of the Shocker XLS and RSX, it is directly connected to the board. Delivery without board Suitable for 9V alkaline batteries
9.95€ *
Being phased into production November 2015, this blue bolt replaces the gold bolt as the standard armature to the bolt system. There is no performance difference between the two parts, the only difference is that the main bolt sail...
24.95€ *
Shocker Main Board SHK117 This is the main board for the Shocker XLS und RSX. This board is the export version (all fire modes) The acquisition and possession is permitted in Germany, but the installation and use may only take place...
59.95€ *
The solenoid rear bracket is used in the Shocker XLS and RSX. Do not tighten the small screws too much otherwise they may break.
12.95€ *
Shocker Paintball Factory part: SHK103 ejection cup The ejection cup is located at the back of the bolt and puts the spring under tension for the bolt to eject when released.
9.95€ *
Factory solenoid for Shocker XLS and RSX markers. [SOL303]
69.95€ *
Shocker SHK120/SHK220 Vertical Retainer Latch The vertical retainer in the bolt lock of the Shocker XLS and RSX. This component holds the bolt in the marker. If the pressure in the Shocker rises too high, this component is designed to...
9.95€ *
This is a full set of eye wires, plug, and sensors to replace the eye system in your Shocker XLS and RSX. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker XLS or RSX eyes are...
19.95€ *
Dies ist die Feder für den Vertical Regulator in der SmartParts Shocker XLS/RSX/CVO. Bei dieser Vertical Regulator Feder handelt es sich um die Export Version. Mit ihr lässt sich die Schussgeschwindigkeit für Spiele im Ausland...
9.95€ *
Viewed