No results were found for the filter!
DLX Luxe 2.0 Eye Cover, left The eye cover of the DLX Luxe 2.0 as a spare part. As every second count, both on and off the field, the eyes are held by rare-earth magnets and can be removed without tools, thus allowing fast access to the eyes and balldetents. These...
49.90€ *
DLX Luxe 2.0 Eye Cover, right The eye cover of the DLX Luxe 2.0 as a spare part. As every second count, both on and off the field, the eyes are held by rare-earth magnets and can be removed without tools, thus allowing fast access to the eyes and balldetents. These...
49.90€ *
DLX Luxe 2.0 Power Cover Kit The on/off switch of your DLX Luxe is broken? With the spare part set you get all the important parts to replace the switch cover.
14.95€ *
DLX Luxe 2.0 Regulator DLX Luxe factory regulator. If something is wrong with your regulator, go with the original and not some aftermarket product. Complete from the velocity screw at the bottom to the o-ring ontop. Fits Luxe 1.0/1.5/2.0/OLED
69.95€ *
DLX Luxe 2.0 V-Reg Nut This nut holds the front grip cover on the regulator. It's best to put an O-ring between this nut and the front cover for optimal hold.
9.95€ *
DLX Luxe ENCORE Power Core Kit The ENCORE Bolt System is a breath of fresh air for your Luxe marker. You can now add the latest in bolt technology to your existing marker. The famous ICE coating is better then before, longer lasting and an even smoother bolt movement....
159.95€ *
DLX Luxe ICE Custom Tech Mat This neoprene mat is perfect for working on your Luxe without scratching the body on your work surface. The back is textured and grippy to keep it in place during even the most intense cleaning sessions. Aside from its attractive logos...
24.95€ *
DLX Luxe ICE-1.0 Spare Part: Piston Seat Luxe Vertical Regulator Factory part: VRG106 VRG Piston Seat The seat is used within the piston as main seal area. If signs of wear are visible it is advised to change the seat. Insert it with the mushroom head first.
1.50€ *
DLX Luxe ICE-1.0 Bolt Spring Screw Allen Key The spring in the bolt of the Luxe is an important part to save the energy of the shot and to keep ready for the next shot. The spring is installed very deep inside of the bolt, so the normal tools are not enough. The bolt spring screw...
4.95€ *
DLX Luxe ICE-1.0 Export Kit The DLX Luxe 2.0 export set. With this set the Luxe can be made ready for abroad. The Luxe Export set contains an export spring and the data cable. New fire modes can be loaded and updates can be pulled using the data cable. Acquisition...
24.95€ *
DLX Luxe ICE-1.0 SATA/USB Cable The Luxe USB data cable connects the Luxe to a computer. With the Luxe programming software the settings of the Luxe can easily be changed and saved on the PC.
15.95€ *
DLX Luxe ICE-1.0 Screw Kit This screw kit contains all the hardware needed for a complete replacement on your Luxe OLED and 2.0 paintball markers.
15.95€ *
DLX Luxe ICE-1.0 Seal Kit This o-ring kit contains all o-rings needed for a complete replacement on your Luxe OLED/2.0/ICE paintball markers. This will rebuild the core, solenoid manifold(not pictured) and ASA.
25.95€ *
DLX Luxe ICE-1.0 Spare Part: Bolt Spring This is the newer updated V2 2.0 spring that goes inside the factory 2.0 bolt. This has the longer V2 spring screw. This updated V2 screw will hold the spring in place better then the V1 screw when the spring is compressed. Less chance...
7.95€ *
DLX Luxe ICE-1.0 Spare Part: Bolt Spring Guide Luxe Bolt Spring Guide within the Bolt of the Luxe. The Screw should be secured with some thread sealant.
7.95€ *
![DLX Luxe ICE-1.0 Spare Part: Feathertouch Manifold [LUX062]](https://www.me-paintball.de/media/image/22/8d/81/dlx-luxe-ice-1_0-ersatzteil_-solenoid-halterung-_4669_1_200x200@2x.jpg "DLX Luxe ICE-1.0 Spare Part: Feathertouch Manifold [LUX062]")
DLX Luxe ICE-1.0 Spare Part: Feathertouch... DLX Luxe Spare Part: LUX214 This is a replacement Feather Touch Manifold kit for all version of the DLX Luxe and OLED Luxe Paintball Guns. Including o-rings
59.95€ *
DLX Luxe ICE-1.0 Spare Part: Solenoid Factory solenoid for Luxe 1.0/1.5/2.0/OLED/ICE Markers.
95.00€ *
DLX Luxe ICE-1.0 Spare Part: Speaker Should the speaker of your Luxe be broken or malfunction, you can replace it with this original spare part from the manufacturer. The speaker is delivered with the necessary connection cable.
9.95€ *
DLX Luxe ICE-1.0 Spare Part: Speaker Frame This is the speaker frame of the Luxe as an original spare part. The speaker frame holds the Luxe speakers in its position inside the gripframe.
29.95€ *
![DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116]](https://www.me-paintball.de/media/image/8b/c4/5f/dlx-luxe-ice-1_0-ersatzteil_-griffschalen-_lux116__4631_1_200x200@2x.jpg "DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116]")
DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116] DLX Luxe Spare part: Stock Grips These are the original stock grips of the DLX Luxe as a spare part [LUX116] . In case your grips are worn down or broken, don't fall for cheap knockoffs, this is the real deal, the factory original part....
29.95€ *
Viewed