No results were found for the filter!
Shocker XLS Accent Kit These custom accent kits for the Shocker XLS allow you to personalize your marker to fit your style. Each kit is the same high quality anodization and fit as your original parts guaranteed to fit without modification. The kit contains: -...
99.95€ *
GOG eNMEy Spare Part: Stainless Braided hose The eNMEy Stainless Braided hose connects the air connection (ASA) to the front grip (Regulator). At both ends it has the common 1/8 inch thread and measures approximately 12 centimeters in length (4 3/4 inch).
9.95€ *
GOG cal.50 eNMEy Spare Part: Actuator Set GOG cal.50 eNMEy Spare Part Factory part: NM5114 NME 50CAL Bolt Push Pin The Push Pin at the end of the bolt, to clear potential bolt jams. Pin and Washer are included in this set
9.95€ *
Shocker XLS/RSX Spare Part: Rear Solenoid Manifold The solenoid rear bracket is used in the Shocker XLS and RSX. Do not tighten the small screws too much otherwise they may break.
12.95€ *
-15%
Virtual Hopper Spire III 280 Der Virtue Spire III ist ein allumfassendes Upgrade des spielgewinnenden Design des ursprünglichen Spire 200 und 260. Der Spire III basiert auf Technologie, die den ursprünglichen Spire zum besten High-End-Loader im Paintball machte und...
169.96€ * 199.95€ *
DLX Luxe 2.0 Eye Cover, right The eye cover of the DLX Luxe 2.0 as a spare part. As every second count, both on and off the field, the eyes are held by rare-earth magnets and can be removed without tools, thus allowing fast access to the eyes and balldetents. These...
49.90€ *
DLX Luxe 2.0 V-Reg Nut This nut holds the front grip cover on the regulator. It's best to put an O-ring between this nut and the front cover for optimal hold.
9.95€ *
DLX Luxe 2.0 Eye Cover, left The eye cover of the DLX Luxe 2.0 as a spare part. As every second count, both on and off the field, the eyes are held by rare-earth magnets and can be removed without tools, thus allowing fast access to the eyes and balldetents. These...
49.90€ *
DLX Luxe ICE-1.0 Spare Part: Speaker Should the speaker of your Luxe be broken or malfunction, you can replace it with this original spare part from the manufacturer. The speaker is delivered with the necessary connection cable.
9.95€ *
DLX Luxe 2.0 Power Cover Kit The on/off switch of your DLX Luxe is broken? With the spare part set you get all the important parts to replace the switch cover.
14.95€ *
DLX Luxe ICE/OLED 5 Way Joystick This is the 5 Way Joystick of the Luxe. This joystick is used to navigate the Luxe menu. A small but immensely important part of the Luxe to be able to adjust it.
9.95€ *
GOG Vertical Regulator Velocity Adjuster Clip GOG Vertical Regulator Factory part: VRG102 Spring Platform The retaining clip secures the Adjustment Screw inside the vertical regulator against accidental loss.
1.00€ *
Shocker XLS/RSX Spare Part: Vertical Retainer... Shocker SHK120/SHK220 Vertical Retainer Latch The vertical retainer in the bolt lock of the Shocker XLS and RSX. This component holds the bolt in the marker. If the pressure in the Shocker rises too high, this component is designed to...
9.95€ *
GOG Vertical Regulator Adjustment Screw (complete) GOG Vertical Regulator Factory Spare Part: VRG104 Regulator Adjustment Screw (complete) The Adjustment Screw is the part that get's turned to adjust the velocity. If it leaks or you have lost it, this will help you get the GOG Vertical...
14.95€ *
![Shocker Screen Cover & Power Button Kit [SHK231]](https://www.me-paintball.de/media/image/4b/a7/d5/shocker-ersatzteil_-displayabdeckung-inkl_-ein_aus_4628_1_200x200@2x.jpg "Shocker Screen Cover & Power Button Kit [SHK231]")
Shocker Screen Cover & Power Button Kit [SHK231] This is the improved display cover of the Shocker AMP including the power button. SHK231 Also compatible with XLS and RSX models, so it can be used as an upgrade to better protect the on/off switch from the elements.
9.95€ *
![DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116]](https://www.me-paintball.de/media/image/8b/c4/5f/dlx-luxe-ice-1_0-ersatzteil_-griffschalen-_lux116__4631_1_200x200@2x.jpg "DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116]")
DLX Luxe ICE-1.0 Spare Part: Stock Grips [LUX116] DLX Luxe Spare part: Stock Grips These are the original stock grips of the DLX Luxe as a spare part [LUX116] . In case your grips are worn down or broken, don't fall for cheap knockoffs, this is the real deal, the factory original part....
29.95€ *
DLX Luxe TM40/X/ICE Vision Top DLX Luxe ICE Spare Part: LUX419 Vision Top The upper half of the ICE Vision system. This part of the eye cable is installed in the body of the Luxe ICE and provides the actual light barrier for the ball control.
36.95€ *
DLX Luxe TM40/X/ICE Vision Bottom DLX Luxe ICE Spare Part: LUX418 Vision Bottom The bottom half of the ICE Vision system. This part of the eye cable is installed in the gripframe of the Luxe ICE and provides the connection to the main board.
15.95€ *
DLX Luxe ICE-1.0 SATA/USB Cable The Luxe USB data cable connects the Luxe to a computer. With the Luxe programming software the settings of the Luxe can easily be changed and saved on the PC.
15.95€ *
GOG Vertical Regulator 1/2 ID Retaining Clip GOG Vertical Regulator Factory part: CLP006 1/2 ID Retaining Clip The retaining clip secures the swivle part to the body of the vertical regulator
1.00€ *
GOG eNMEy "DEALER Kit" The Spare Parts Kit "DEALER" for the GOG eNMEy includes everything so your eNMEys are ready on gameday.
100.00€ *
DLX Luxe 2.0 Bolt with Spring DLX Luxe Spare Part: LUX063 Bolt with Spring The factory bolt with bolt spring for the Luxe
49.95€ *
Shocker XLS Spare Part: Regulator Piston 2.0 Shocker AMP Regulator Piston SHK205 The Shocker AMP Regulator Piston as a replacement for the Vertical Regulator of the Shocker AMP and XLS.
9.95€ *
Viewed