No results were found for the filter!
![DLX Luxe IDOL spare part Vision Top [LUX719.1]](https://www.me-paintball.de/media/image/ce/8f/2e/dlx-luxe-idol-ersatzteil-augen-obere-haelfte-_lux719_5598_1_200x200@2x.jpg "DLX Luxe IDOL spare part Vision Top [LUX719.1]")
DLX Luxe IDOL spare part Vision Top [LUX719.1] DLX Luxe IDOL Spare Part: LUX 7 19 .1 Vision Top The upper half of the I DOL Vision system. This part of the eye cable is installed in the body of the Luxe I DOL and provides the actual light barrier for the ball control.
36.95€ *
![DLX Luxe IDOL spare part Vision Bottom [LUX718]](https://www.me-paintball.de/media/image/ed/f1/01/dlx-luxe-idol-ersatzteil-augen-untere-haelfte-_5599_1_200x200@2x.jpg "DLX Luxe IDOL spare part Vision Bottom [LUX718]")
DLX Luxe IDOL spare part Vision Bottom [LUX718] DLX Luxe I DOL Spare Part: LUX 7 18 Vision Bottom The bottom half of the I DOL Vision system. This part of the eye cable is installed in the gripframe of the Luxe I DOL and provides the connection to the main board.
15.95€ *
Shocker ERA German Spring Set Dies ist die Feder mit Unterlegscheibe (1 x 1 mm oder 2 x 0,5 mm - je nach Verfügbarkeit) für den Vertical Regulator in der DLX Shocker ERA. Bei dieser Vertical Regulator Feder handelt es sich um die "Deutsche" Version. Mit ihr...
10.95€ *
Shocker AMP German Spring Dies ist die Feder für den Vertical Regulator in der SmartParts Shocker AMP. Bei dieser Vertical Regulator Feder handelt es sich um die Export Version. Mit ihr lässt sich die Schussgeschwindigkeit für Spiele im Ausland einstellen. Der...
9.95€ *
![Shocker AMP ASA-Set [SHK436/SHK437/SSC010]](https://www.me-paintball.de/media/image/7f/e8/b7/shocker-amp-asa-set-_shk436_shk437_ssc010__5608_1_200x200@2x.jpg "Shocker AMP ASA-Set [SHK436/SHK437/SSC010]")
Shocker AMP ASA-Set [SHK436/SHK437/SSC010] Shocker AMP spare parts set SHK436/SHK437/SSC010 ASA including on/off screw and two handle frame retaining screws.
59.95€ *
![DLX Luxe IDOL/TM40 spare part: Bolt Back with QEV [LUX604]](https://www.me-paintball.de/media/image/25/b7/a8/dlx-luxe-idol_tm40-ersatzteil_-bolzenhinterteil-mit_5604_1_200x200@2x.jpg "DLX Luxe IDOL/TM40 spare part: Bolt Back with QEV [LUX604]")
DLX Luxe IDOL/TM40 spare part: Bolt Back with... Luxe IDOL / TM40 spare part: LUX604 bolt back with QEV The rear assembly of the Luxe IDOL bolt, including O-rings, seals and QEV
59.95€ *
![DLX Luxe IDOL spare part: Air passage ASA to Gripframe and Gripframe to Body [LUX764]](https://www.me-paintball.de/media/image/03/9e/28/dlx-luxe-idol-ersatzteil_-luft-verbindung-asa_5605_1_200x200@2x.jpg "DLX Luxe IDOL spare part: Air passage ASA to Gripframe and Gripframe to Body [LUX764]")
DLX Luxe IDOL spare part: Air passage ASA to... Luxe IDOL spare part: LUX 7 64 Air passage ASA to Gripframe and Gripframe to Body for the Luxe IDOL The air flow between the assemblies of the Luxe IDOL is m ade by this connector. Both the connection between the b ody and the gripframe,...
19.95€ *
![Luxe IDOL spare parts set: Backstrap Closure Set [LUX770/CLP016/SSS012]](https://www.me-paintball.de/media/image/a7/58/f4/dlx-luxe-idol-ersatzteilset_-backstrap-verschluss_5606_1_200x200@2x.jpg "Luxe IDOL spare parts set: Backstrap Closure Set [LUX770/CLP016/SSS012]")
Luxe IDOL spare parts set: Backstrap Closure... Luxe IDOL spare parts set: LUX770/CLP016/SSS012 Backstrap closure set for the Luxe IDOL (without backstrap) consisting of the holding frame casing made of non-ferrous metal, the holding clip and the stainless steel screw
9.90€ *
![DLX spare part: grip screw Luxe - Shocker - GOG [SSB012]](https://www.me-paintball.de/media/image/b9/a7/e5/dlx-ersatzteil_-griffschalenschraube-luxe-shocker_5597_1_200x200@2x.jpg "DLX spare part: grip screw Luxe - Shocker - GOG [SSB012]")
DLX spare part: grip screw Luxe - Shocker - GOG... This screw is used to attach the grips to the grip frame of markers of the brands: Luxe (TM40, X, ICE, OLED, 2.0 and older), Shocker (ERA, AMP, XLS and RSX), GOG (eNMEy, eNVy and older), AKA markers (depending on the thickness of the...
3.90€ *
Beachflag flag "Luxe", 4 meters (only cloth flag) Beach flag "Luxe", 4 meters (fabric flag only, without ground spike and mast)
69.90€ *
Beachflag flag "Freak", 4 meters (only cloth flag) Beach flag "Luxe", 4 meters (fabric flag only, without ground spike and mast)
69.90€ *
Beachflag flag "Shocker", 4 meters (only cloth... Beach flag "Luxe", 4 meters (fabric flag only, without ground spike and mast)
69.90€ *
Tomahawk cardboard trash can The cardboard bucket from Tomahawk, so that old packaging can be collected appropriately. Dimensions: 35 cm wide 35 cm deep 80 cm high
19.90€ *
Planet Eclipse CF20 Magazine The Eclipse CF (Continuous Feed) paintball magazine is the first fully injection molded 20-round continuous feed magazine for the EMF100 (formerly EMG100) and Dye DAM platforms. Its revolutionary design allows for quick and accurate...
32.90€ *
![DLX Luxe IDOL/TM40/X/ICE Regulator-Screw [LUX443]](https://www.me-paintball.de/media/image/55/04/96/dlx-luxe-idol_tm40_x_ice-regulator-halteschraube-_5595_1_200x200@2x.jpg "DLX Luxe IDOL/TM40/X/ICE Regulator-Screw [LUX443]")
DLX Luxe IDOL/TM40/X/ICE Regulator-Screw [LUX443] Original Luxe spare part number LUX443 This screw holds the regulator in the front handle. An O-ring is already integrated for optimal hold.
12.95€ *
Shocker ERA/AMP Export Kit Dies ist die Feder für den Vertical Regulator in der SmartParts Shocker AMP. Bei dieser Vertical Regulator Feder handelt es sich um die Export Version. Mit ihr lässt sich die Schussgeschwindigkeit für Spiele im Ausland einstellen. Der...
19.95€ *
Nuprol 1.0 Premium Blue Gas 500ml Nuprol 1.0 is the ultimate low pressure blue gas and proven on many GBB airsoft weapons. Compared to most gases on the market, you can expect a smoother FPS and better overall recoil. Optimized for temperatures between 10°C and 25°C...
15.90€ *
Construction-Banner "DLX Europe" Luxe, Shocker,... Construction-Banner DLX EUROPE "Basic" - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 130 g / m ² decorative fabric Dimensions: Approx. 335 x 180 cm
89.90€ *
Construction-Banner "The Wall - Middle" 335 x... Construction-Banner "The Wall V1" - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 130 g / m ² decorative fabric Dimensions: Approx. 335 x 180 cm
89.90€ *
Construction-Banner "The Wall - Right" 335 x... Construction-Banner "The Wall - Right" - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 130 g / m ² decorative fabric Dimensions: Approx. 335 x 180 cm
89.90€ *
Construction-Banner "The Wall - Left & Right"... Construction-Banner "The Wall - Left/Right" - High quality cloth banner - Metal inserts for flexible mounting - colourfast, washable - can be used inside and outside - 130 g / m ² decorative fabric Dimensions: Approx. 335 x 180 cm
89.90€ *
DLX Luxe® IDOL marker "Joy Division" Graphic Wrap The new flagship from DLX Technologies is called Luxe IDOL. The variant shown here is the design version for the “JOY DIVISION” team. The design was elaborately applied to the marker using a special graphic wrap process. The core is of...
2,195.00€ *
Enola Gaye Frag Grenade, EG67 Frag Grenade Eine Simulations-/Trainingsgranate, die hauptsächlich aus Papierzellstoff in Form einer M67-Granate besteht. Das Gehäuse ist robust und lässt sich nicht so leicht zerdrücken, und wenn es explodiert, ist die Splitterung harmlos. Es ist...
9.90€ *
Shocker ERA Frontgrip, black Shocker ERA Frontgrip SHK541 This is the Frontgrip for the Shocker ERA.
19.95€ *
Viewed